Calculators

Five home energy calculators

Each one runs in your browser, saves nothing and takes your own electricity rate. Results update as you type.

Appliance cost calculator

Pick an appliance or type the wattage from its label. Costs assume it runs every day.

Find it on your bill: total charge divided by kWh used.
Per day–
Per month–
Per year–

Read: what every appliance costs to run

Thermostat setback estimator

Uses the Department of Energy rule of thumb: about 1% of heating cost saved per degree, per 8 hours of setback.

Estimated saving–
Per year–
Over 10 years–

Read: thermostat settings that cut heating bills

Gas furnace vs heat pump

Starts from what you pay for gas heat today and works out what the same heat costs from a heat pump.

Heat you use–
Heat pump cost per year–
Difference–

COP is heat out per unit of electricity in, averaged over the season. Colder climates sit lower, mild ones higher.

Read: are heat pumps worth it?

Solar payback calculator

A first-pass estimate. A real quote will use your roof, shading and utility tariff.

Roughly 3.5 in the cloudy north, 6+ in the desert Southwest.
Net cost–
First-year output–
First-year savings–
Payback–
25-year net gain–

Assumes 20% system losses and 0.5% panel output loss a year. Excludes maintenance, inverter replacement and financing costs.

Read: is solar worth it for your home?

Standby power cost

Add up the always-on watts in your home (a plug-in meter reads them) and see the yearly cost.

Energy per year–
Cost per year–
Over 10 years–

Read: the standby power on your bill